The set includes easy to use visual instructions with "Quick Start" Programing guide.
Program your MINDS-I kit with the Arduino Uno, a micro controller based on the Atmega328. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, and ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.
Microcontroller ATmega328 Operating Voltage 5V
Input Voltage (recommended) 7-12V; Input Voltage (limits) 6-20V
Digital I/O Pins 14 (of which 6 provide PWM output)
Analog Input Pins 6
DC Current per I/O Pin 40 mA DC Current for 3.3V Pin 50 mA
Flash Memory 32 KB (ATmega328) of which 0.5 KB used by bootloader
SRAM 2 KB (ATmega328)
EEPROM 1 KB (ATmega328)
Clock Speed 16 MHz
Plug the Sensor Shield on the top of your Arduino to make it easy to connect your digital and analog sensors, ESC, Servos, and ultrasonic sensors. This is great for use in the classroom. Breaks out the 13 digital ports and 6 analog ports to easy to connect Voltage, Ground, and Signal. The shield also includes I2C and Serial connectors.
Sensor Shield V5
3 Parallax Ping sensors
Arduino Referance Guide
All necissary hardware and cables
Works with: (Available for Purchase Separately)
4X4 Robot 3-in-1 Kit (CKE-TR04-001)
2-in-1 Super Rover Kit (CKE-AV06-002)
QTI (Infared) (EMC-PLX1-001)
Arduino Autonomous Upgrade Module